High Rise Aluminum Intake Manifold SATIN For SBF Ford 351W Windsor 3500-8000 RPM

Description

Intake works on 351Ws with 9.50" deck height. For use with square bore style carbs. No provision for manual choke or exhaust crossover. Not EGR equipped. Please note that early 351W engines with points style distributor may have a clearance problem with manifold and may require the use of a smaller diameter distributor.    This Shootout Manifold for Ford 351W engines has a number of features not found in similar competitive manifolds. they have a bridged rear water crossover passage which contributes to a cooler running engine. It also comes with injector bosses that can be drilled and tapped for nitrous nozzles.
GetFastShipping
Best store of motor parts
High Rise Aluminum Intake Manifold SATIN For SBF Ford 351W Windsor 3500-8000 RPM
Intake works on 351Ws with 9.50" deck height. For use with square bore style carbs. No provision for manual choke or exhaust crossover. Not EGR equipped. Please note that early 351W engines with points style distributor may have a clearance problem with manifold and may require the use of a smaller diameter distributor.
This Shootout Manifold for Ford 351W engines has a number of features not found in similar competitive manifolds. they have a bridged rear water crossover passage which contributes to a cooler running engine. It also comes with injector bosses that can be drilled and tapped for nitrous nozzles.
360° single plane high rise design for outstanding power from 3500 to 7500 RPM
Cast-in bosses on intake runners, can be drill / tapped for use with nitrous or fuel injection
Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
Ideal port position - allows custom porting for maximum power
Bridged rear water crossover passage to equalize flow and help keep temperature lower
Has 2 extra tapped water ports at back of intake
For engines with 9.50" deck height
Description:
Item is 100% New, Never used or installed.
Engine Block Style:  Stock standard deck
Intake Style:  Single plane
Basic Operating RPM Range:  3,500-8,000
Intake Manifold Height:  5.680 in.
Intake Material:  Aluminum
Intake Finish:  SATIN
EGR:  No
Professional installation in highly recommended.
No instruction included.
Package including:
1 X Intake Manifold
As Shown in the Picture above.
Item Specifics
Brand
Unbranded
UPC
Does not apply
Manufacturer Part Number
Does not apply
Warranty
Yes
Material
Aluminum
Warranty
We accept a three-month warranty against manufacture defect.
Payment
We accept Ebay payment only.
All major credit cards are accepted through secure payment processor Ebay payment.
Payment must be received within 7 business days of auction closing.
If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
We accept a three-month warranty against manufacture defect.
Shipping
We usually ship within 1-3 business days(Monday- Friday), except some Chinese traditional holidays after receiving cleared payment.
The orders of Friday would be shiped in the next Monday.
We will ship our product from United States
, and it may takes about 3 to 10 business days to arrive your place.
Returns
We understand that sometimes you need to make a return or an exchange. For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used. In order to process a return or exchange, please send us a message through eBay and we will be happy to assist you immediately. Your satisfaction is our priority.
If you need any assistance, or just have questions, please do not hesitate to contact us. We are dedicated to providing you with all of the information you need to make a confident purchase, and we continue to support you after your purchase.
Customer Services
Our office hours are 8:00 a.m to 5:00 p.m (GMT +8) of Monday to Friday.
And our Office is closed on weekends and public holidays.
We apologize for the late reply during the holidays.
GetFastShipping
Best store of motor parts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
3'' V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes STAINLESS STEEL
USD 18.75
2 X 2.5" V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes Stainless Steel
USD 27.76
4 X 3" V-Band Flange&Clamp Kit Male/Female With Ridge Exhaust Downpipe Stainless
USD 49.79
2.5" Front Leveling lift kit For Chevy Silverado GMC Sierra GM 1500 07-17 Black
USD 17.56
4" Inch Turbo Exhause Down Pipe Stainless Steel V-Band Clamp with Flange #304
USD 22.10
New List Item
1100lb 9" Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATV
USD 62.99
2pcs 3" Outlet / 76MM In 304SS Exhaust Muffler Weld Electrical Valve Control Set
USD 320.55
For 64-70 Ford SBF Mustang 289 302 351 Long Tube Stainles Exhaust Headers New
USD 155.66
2PC 2.5" In/Out Exhaust Muffler Valve Cutout+One Wireless Remote Controller
USD 306.99
2PC 3" 76mm Tip Single Exhaust Muffler Valve Cutout + Wireless Remote Controller
USD 310.98
High Rise Aluminum Intake Manifold SATIN For SBF Ford 351W Windsor 3500-8000 RPM
Intake works on 351Ws with 9.50" deck height. For use with square bore style carbs. No provision for manual choke or exhaust crossover. Not EGR equipped. Please note that early 351W engines with points style distributor may have a clearance problem with manifold and may require the use of a smaller diameter distributor.
This Shootout Manifold for Ford 351W engines has a number of features not found in similar competitive manifolds. they have a bridged rear water crossover passage which contributes to a cooler running engine. It also comes with injector bosses that can be drilled and tapped for nitrous nozzles.
360° single plane high rise design for outstanding power from 3500 to 7500 RPM
Cast-in bosses on intake runners, can be drill / tapped for use with nitrous or fuel injection
Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
Ideal port position - allows custom porting for maximum power
Bridged rear water crossover passage to equalize flow and help keep temperature lower
Has 2 extra tapped water ports at back of intake
For engines with 9.50" deck height
Description:
Item is 100% New, Never used or installed.
Engine Block Style:  Stock standard deck
Intake Style:  Single plane
Basic Operating RPM Range:  3,500-8,000
Intake Manifold Height:  5.680 in.
Intake Material:  Aluminum
Intake Finish:  SATIN
EGR:  No
Professional installation in highly recommended.
No instruction included.
Package including:
1 X Intake Manifold
As Shown in the Picture above.
Warranty
We accept a three-month warranty against manufacture defect.
Payment
We accept Ebay payment only.
All major credit cards are accepted through secure payment processor Ebay payment.
Payment must be received within 7 business days of auction closing.
If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
We accept a three-month warranty against manufacture defect.
Shipping
We usually ship within 1-3 business days(Monday- Friday), except some Chinese traditional holidays after receiving cleared payment.
The orders of Friday would be shiped in the next Monday.
We will ship our product from United States
, and it may takes about 3 to 10 business days to arrive your place.
Returns
We understand that sometimes you need to make a return or an exchange. For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used. In order to process a return or exchange, please send us a message through eBay and we will be happy to assist you immediately. Your satisfaction is our priority.
If you need any assistance, or just have questions, please do not hesitate to contact us. We are dedicated to providing you with all of the information you need to make a confident purchase, and we continue to support you after your purchase.
Customer Services
Our office hours are 8:00 a.m to 5:00 p.m (GMT +8) of Monday to Friday.
And our Office is closed on weekends and public holidays.
We apologize for the late reply during the holidays.